Garmin Edge 1060 – GPS Bike Computer with Touchscreen and Voice Commands

Garmin Edge 1060: GPS bike computer for navigation and training

Garmin Edge 1060 is designed for passionate, performance-focused cyclists. It combines advanced navigation, training tools and connected features in a device with a 3.5″ colour touchscreen and button controls. The 480 × 800-pixel display lets you view maps, routes and ride data.

Built-in microphone, speaker and voice control

The integrated microphone allows you to control the bike computer hands-free using voice commands, available in selected languages. With Garmin Messenger and a connected smartphone, you can send text and voice messages. The built-in speaker delivers navigation instructions and voice prompts, while the device’s bike bell can be activated by double-tapping any screen.

Cycling maps and personalised routes

Preloaded maps include worldwide Trailforks mountain bike trail data. You can create routes directly on the touchscreen, view road surface types and check a route preview showing distance, elevation, estimated riding time, the percentage of high-traffic roads and reported hazards.

Trendline routing uses the roads and trails most frequently ridden by Garmin cyclists. Free Flow routing helps you find training routes with fewer stops and junctions, while Up Ahead displays the distance to selected points of interest along your route. Maps can be managed and updated over Wi-Fi.

Garmin Coach, ClimbPro and effort management

Garmin Coach cycling plans adapt to your training, recovery and route demands. Training Status and daily suggested workouts help you monitor your preparation, while real-time stamina shows your remaining energy during your effort.

ClimbPro displays the remaining ascent and gradient. Power Guide recommends power targets, taking real-time stamina and wind into account. When using Power Guide or following a workout, smart fuelling provides guidance during your ride based on your fitness, route demands, heat and humidity.

Dedicated mountain biking features

Edge 1060 includes Downhill, Enduro and eEnduro profiles, timing gates and MTB dynamics. It records jump count, jump distance and hang time, while Grit and Flow metrics describe trail difficulty and riding smoothness. In enduro and downhill profiles, multi-band GPS supports recording at 5 Hz.

Connectivity and safety features

GroupRide lets you share messages, locations and data during group rides. LiveTrack allows friends and family to follow your ride. Other features include incident detection, a bike alarm and compatibility with Garmin Varia radar and lights.

Bluetooth, ANT+ and Wi-Fi connectivity enable integration with compatible sensors and devices. Edge 1060 also supports smart trainers, compatible eBikes, electronic shifting systems, Garmin Pay, Garmin Connect and Connect IQ.

Up to 60 hours of battery life

The rechargeable lithium-ion battery delivers up to 20 hours of demanding use and up to 60 hours in battery saver mode. Reverse charging allows you to power other devices in emergency situations using a compatible USB-C cable.

Some training and performance features require a compatible heart rate monitor, power meter or both. Connected, messaging and safety features require a compatible smartphone and the relevant apps where specified. Voice command performance may vary depending on riding conditions. Reverse charging is not designed for use while riding.

Garmin Edge 1060 technical specifications

General specifications

• Dimensions: 58.5 × 107 × 16.3 mm.

• Weight: 142 g.

• Water rating: IPX7.

• Display: colour LCD touchscreen.

• Display diagonal: 3.5″, equivalent to 88.9 mm.

• Resolution: 480 × 800 pixels.

• Controls: touchscreen, buttons and voice control.

• Audio: built-in microphone and speaker.

Battery and battery life

• Battery type: rechargeable lithium-ion.

• Battery life with demanding use: up to 20 hours.

• Battery life in battery saver mode: up to 60 hours.

• Charging while riding: compatible with Power Mount and Garmin Charge Power Pack.

• Reverse charging: supported; requires a compatible USB-C cable and is not designed for use while riding.

Maps and memory

• Internal memory: 64 GB.

• Stored locations: 200.

• Stored courses: 100.

• History: up to 200 hours.

• Mapping: Garmin Cycle Map, TopoActive cycling maps and worldwide basemap.

• Trail data: integrated Trailforks data.

• Additional maps: supported.

• Map management: via Wi-Fi.

• Course creation: directly on the device.

• Navigation: turn-by-turn directions, Trendline, Free Flow, points of interest along the route and Back to Start.

Satellite systems and sensors

• Satellite systems: GPS, GLONASS and Galileo.

• Multi-band GNSS: supported.

• 5 Hz GPS recording: in enduro and downhill profiles.

• Built-in sensors: barometric altimeter, gyroscope, accelerometer, magnetometer and ambient light sensor.

Connectivity and compatibility

• Wireless connectivity: Bluetooth, ANT+ and Wi-Fi.

• Smartphone compatibility: iPhone and Android.

• Apps: Garmin Connect, Garmin Messenger and Connect IQ.

• Sharing: Garmin Share.

• Contactless payments: Garmin Pay with participating providers.

• Compatible accessories: power meters, smart trainers, Varia radar and lights, and compatible inReach devices.

• Electronic shifting: ANT+, Shimano Di2 Synchro integration and SRAM AXS integration.

• eBikes: compatibility with supported systems, including Bosch smart systems and Shimano eBike systems.

Training and performance

• Planning: Garmin Coach, downloadable training plans and daily suggested workouts.

• Metrics: VO2 max, Training Status, Training Load, Training Effect and recovery advisor.

• Effort management: real-time stamina, Power Guide and ClimbPro.

• Workouts: interval training, advanced workouts and customisable data pages.

• Automatic features: Auto Pause and Auto Lap.

• Mountain biking: MTB dynamics, Grit, Flow, Gravity profiles and timing gates.

• Fuelling: nutrition and hydration alerts, plus smart fuelling.

Safety and smart features

• Tracking and group riding: LiveTrack, GroupTrack and GroupRide.

• Safety: assistance and incident detection, including off-road detection during supported activities.

• Bike protection: bike alarm and Find My Edge.

• Alerts: community-reported hazards, smartphone notifications and weather alerts.

• Messaging: text and voice messages through Garmin Messenger.

• Additional features: built-in bike bell, smartphone music controls and real-time weather map.

Features depend on the required compatible devices, sensors and apps. Using inReach features requires a satellite subscription.